SJOIN Leak Pipe Repair Bandage (Waste Pipe Tape) is also known as industrial armored winding tape, armor tape, armor belt. It is a fast curing tape composed of flexible fiberglass mesh impregnated with water activated polyurethane resin. It enable any user to make a permanent pipe repair to a burst or leaking pipe repair in under 30 minutes without formal training, even when water pressure cannot be isolated and water flow does not need to be turned off to carry out a repair. Pipe repairs are effective on pipes of all types in industrial and domestic settings and cost a fraction of carrying out a pipe replacement and pipe repair.
1.No need to consider base material ,it can be used for all types of pipes,even most plastic types.
2.Activate when mixed with water,no need to mix with activator to start curing
3.Does not produce any heat during curing
4.No sparks
5.No distortion of the base material
6. easy to use and carry
7.odorless, non-toxic, non-flammable, durable,
8.resistance to mechanical wear and tear , corrosion resistance, high insulation
Waste pipe tape is mainly used to repair Oil , Gas,Water Pipeline,etc. It adheres to Stainless steel,Steel, Metal, plaster, PVC, Copper, Rubber, Fiberglass, Concrete, Wood, Ceramic, Polyester, etc. It can be applied on cracked, fractured, corroded, damaged & leaking pipes,around difficult shapes including straight lengths,tee and elbow joints.
| Initial cure time |
5 minutes |
| Full cure time |
30minutes |
| Shore D hardness |
70 |
| Tensile strength |
30-35Mpa |
| Tensile modulus |
7.5Gpa |
| Maximum service temperature |
180°C |
| Pressure resistance |
450psi (Min wrapping 12 layers around cracked/leaking area) |
| Model |
Specification |
Color |
| Inch x yard |
Centimetre |
| SJ01-360 |
1"x4yd |
2.5cmx360cm |
white, green, red, yellow, blue |
| SJ02-360 |
2''X4yd |
5.0cm x 360cm |
| SJ03-360 |
3''X4yd |
7.5cm x 360cm |
| SJ04-360 |
4''X4yd |
10.0cm x 360cm |
| SJ05-360 |
5''X4yd |
12.5cm x 360cm |
| SJ06-360 |
6''X4yd |
15.0cm x 360cm |
| Any size can be made as your request |
1, If used for leak repair, first with the traditional plugging material will block off the leaks, omit this step when used for other purposes.
2, Wear gloves, open bags, take out the tape and directly pour the water (about 25C) into the bag, remove the tape after a few seconds squeezes, squeeze out excess water tape.
3, armored tape wrap spirally on the fixed parts, each overlapping layer of 1/3, and a little to the force, generally winding 4 to 8 layers, concrete layers vary depending on the application. It should be rubbed repeatedly after winding and pressed surface to shaping in order to increase the adhesive force between the layers.
4, Armoring tape must be used once you open the bags, each time you open a bag (can't open several bags one time), and the operation is completed within the stipulated time.
5, The water temperature and working temperature decides the curing time, curing time reference values are as follows:
2ºC/ 36 ºF ( 15 minutes), 25 ºC / 77ºF (8 minutes), 50 ºC / 122 ºF (4 minutes)
6.Storage: Keep in a cool and dry place, indoor storage temperature in 10ºC ~ 30ºC.
Each bandage is wrapped individually in a Aluminum Plastic Bag, and then put them in Hard Inner Box,Outside Corrugated Carton
10bags/box, 9boxes/ctn.
We support shipping in Air or Ocean way, 7-15 working days after payment.
){kind=link}